Covering

Split-PE

Split-PE is a hard polyethylene tube, split over its entire length. Because of the hardness of split-PE, it cannot be used as protection against damaging. Split-PE is only used to reduce the gap between the rods. The biggest advantage of split-PE is that it can be mounted or removed at any time.

Type Dimensions  Material
Split-PE 6×9 polyethylene
Split-PE 8×12 polyethylene
Split-PE 9×12 polyethylene
Split-PE 10×14 polyethylene
Split-PE 10×16 polyethylene
Split-PE 11×16 polyethylene
Split-PE 11×18 polyethylene
Split-PE 12×16 polyethylene
Split-PE 14×18 polyethylene
Split-PE 16×20 polyethylene
Split-PE 15×21 polyethylene

Star-PVC

To protect the product from damaging we can cover the rods with soft star-PVC. This is a soft PVC tube that is profiled on the inside. It is available in many sizes. Because of the fact that this tube can practically always be used and offers good results at a reasonably low price, one can find a sieve web with star-PVC in almost every potato harvester.

Type Dimensions  Material
Star-PVC 7,5×14 PVC
Star-PVC 8,5×15 PVC
Star-PVC 9,5×16 PVC
Star-PVC 9,5×18 PVC
Star-PVC 10,5×16 PVC
Star-PVC 10,5×18 PVC
Star-PVC 10,5×20 PVC
Star-PVC 11,5×18 PVC
Star-PVC 11,5×21 PVC
Star-PVC 13×19 PVC
Star-PVC 15×21 PVC
Star-PVC 16×25 PVC

Soft PVC

This is a soft PVC covering for ø6mm rods.

Type Dimensions  Material
Soft-PVC 6,5×9 PVC
Soft-PVC 6,5×11 PVC

ACT

ACT is a PVC air chamber tube for round bars and is available in 2 sizes only. The air chambers make ACT a very soft covering.

Type Dimensions  Material
ACT 11×24 PVC
ACT 15×27 PVC

Supplier of: